Honeywell Granit 1911i 2D barcode scanner

Product code : BYPOS-3195

In stock

Starting at
£435.00 £526.35
Product Name Price Qty
Honeywell Granit 1911i, BT, 2D, ER, multi-IF, red Bluetooth scanner, industry, 2D, imager (extended range), vibration, range: 100 m, multi-interface (RS232, KBW, USB), IP65, order separately: interface cable, charging/transmitter cradle, colour: red 36 Months
£495.00 £598.95
Honeywell Granit 1911i, BT, 2D, ER, multi-IF, kit (USB), red Bluetooth scanner, industry, 2D, imager (extended range), vibration, range: 100 m, multi-interface (RS232, KBW, USB), IP65, incl.: cable (USB), charging/transmitter cradle, colour: red 36 Months
Special Price £435.00 £526.35

High performance for wireless use: the area imager Granite 1911i from Honeywell makes it possible. Wherever you need it - for production, warehousing, logistics - it gives its all 100% anywhere. The case is so robust that it withstands numerous drops of up to 2 m without damage - even on a concrete floor. The Granite 1911i is also effectively protected against the penetration of water, dust and other foreign matter, and has IP65 certificate protection.

Top reading performance and reliable barcode scanning is ensured by the strong scan engine with Adaptus Imaging 6.0 technology inside. Honeywell has installed in the Granite series the same engine that is also embedded in the best in its class area imager Xenon 1900. The Granite 1911i reads barcodes of all kinds quickly and reliably: this of course includes 1D, 2D and PDF codes, as well as damaged or difficult to read barcodes. The imager captures linear 20-mil codes even from a distance of more than 50 cm. Speed up the process with the cordless imager: thanks to Bluetooth Class 1, data transmission works smoothly within a range up to 100 meters.
Employees can thus move freely around the work area and can be assigned flexibly. A battery charge lasts for up to 14 hours or 50,000 scans - whether at -30 ° C or +50 ° C. If the battery is empty, replace it easily and without tools in a matter of seconds.

The scan confirmation occurs both visually and audibly by default, via a lit LED and a programmable beeper. For particularly noisy or poorly lit environments, you can optionally equip the Granite 1911i with a vibration feedback. The scanner then vibrates after a good scan, leaving no doubt. Thus, you increase efficiency and avoid a multiple scanning of the same barcode.

To work more cost effectively, easily operate up to seven Granite imagers with a single base station. You will conserve budget funds without having to make compromises. Another practical item is the paging feature, which significantly facilitates finding misplaced scanners. The scanning software Remote MasterMind simplifies network integration for administrators.

A three-year warranty secures the investment. Nothing should happen to the Granite 1911i: in the test, the scanner was still fully operational after 5,000 1 metre drops.

Honeywell Granit 1911i Specifications


2.4 to 2.5 GHz (ISM Band) Adaptive Frequency Hopping Bluetooth v2.1: Class 1: 100m (300’) line of sight

Data Rate (Transmission Rate)
Up to 1 Mbits/S

2000 mAh Li-ion minimum

Number of Scans
Up to 50,000 scans per charge

Expected Hours of Operation
14 hours

Expected Charge Time*
4.5 hours


Dimensions (LxWxH)
Scanner (1911iER-3): 133 mm x 75 mm x 195 mm (5.2˝ x 2.9˝ x 7.6˝)
Charger/Communication Base (COB02/CCB02-100BT-07N): 250 mm x 103 mm x 65 mm (9.9˝ x 4.1˝ x 2.6˝)

Scanner (1911iER-3): 300 g (10.6 oz)
Charger/Communication Base (COB02/CCB02-100BT-07N): 290 g (10.2 oz)


Operating Power (Charging)
Scanner (1911iER-3): N/A
Charger/Communication Base (COB02/CCB02-100BT-07N): 5 W (1A @ 5 V)

Non-Charging Power
Scanner (1911iER-3): N/A
Charger/Communication Base (COB02/CCB02-100BT-07N): 0.6 W (0.12A @ 5 V)

Host System Interfaces
Scanner (1911iER-3): N/A
Charger/Communication Base (COB02/CCB02-100BT-07N): USB, Keyboard Wedge, RS232 TTL


Operating Temperature**
Scanner (1911iER-3): -20°C to 50°C (-4°F to 122°F)
Charger/Communication Base (COB02/CCB02-100BT-07N): -20°C to 50°C (-4°F to 122°F)*

Storage Temperature
Scanner (1911iER-3): -40°C to 70°C (-40°F to 158°F)
Charger/Communication Base (COB02/CCB02-100BT-07N): -40°C to 70°C (-40°F to 158°F)

Scanner (1911iER-3): Up to 95% relative humidity, non-condensing
Charger/Communication Base (COB02/CCB02-100BT-07N): Up to 95% relative humidity, non-condensing

Scanner (1911iER-3) and Charger/Communication Base (COB02/CCB02-100BT-07N): Designed to withstand 50 2 m (6.5´) drops to concrete at -30°C

Scanner (1911iER-3) and Charger/Communication Base (COB02/CCB02-100BT-07N): 5,000 1m (40˝) tumbles

Environmental Sealing
Scanner (1911iER-3): IP65
Charger/Communication Base (COB02/CCB02-100BT-07N): IP51

Light Levels
Scanner (1911iER-3): 0 to 100,000 lux (9,290 foot-candles)
Charger/Communication Base (COB02/CCB02-100BT-07N): N/A

Scanner (1911iER-3) and Charger/Communication Base (COB02/CCB02-100BT-07N): ±20Kv air discharge, ±8kV contact discharge

Scan Performance

Scan Pattern
Area Imager (838 x 640 pixel array)

Motion Tolerance
Up to 610 cm/s (240 in/s) at 16.5 cm (6.5”) and 381 cm/s (150 in/s) at 25 cm (10.0”) for 13 mil UPC

Scan Angle
ER Focus: Horizontal: 31.6°; Vertical: 24.4°

Symbol Contrast
20% minimum reflectance difference

Pitch, Skew
45°, 65°

3 year factory warranty

*battery charging only occurs between 5° C and 40°C;
**with industrial grade cable ordered separately

Technology Imager-Scanner
Type Scanner Cordless
Manufacturer Honeywell
Only registered users can write reviews. Please Sign in or create an account